海外工程重油发电机组安装施工组织设计(中英文版)

发表于2014-01-02     5042人浏览     2人跟帖     总热度:345  

  • 文件格式:doc
  • 文件大小:121.00KB
  • 等级:

资料目录

  • 1 机务部分施工方案 1
  • 1.1 主厂房行车吊装 1
  • 1.1.1 吊装步骤The Lifting Process 1
  • 1.2 柴油发电机组吊装 2
  • 1.2.1 发电设备安装 2
  • 1.2.2 机械辅助系统安装 3
  • 1.3 烟道制作安装及烟囱吊装 3
  • 1.3.1 烟道制作 3
  • 1.3.2 烟道安装 5
  • 1.3.3 烟囱安装 7
  • 1.4 管道安装 7
  • 1.4.1 主要安装工序 7
  • Main Installation Procedure: 7
  • 1.4.2 阀门检验、研磨、标识Examining, Grinding and Marking of the Valves 8
  • 1.4.3 系统管道压力试验The Pressure Test of the System Piping 10
  • 1.5 润滑油系统安装及冲洗 11
  • 1.5.1 油管道的安装Installation of Oil-piping 11
  • 1.5.2 润滑油泵的安装(参考燃油泵安装) 12
  • 1.5.3 冷油器试压清理。Testing pressure and cleaning for oil cooler 12
  • 1.5.4 油系统冲洗Oil System Flushing 12
  • 1.6 燃油系统安装 15
  • 1.6.1 油罐的制作安装 15
  • 1.6.2 罐体充水试验 18
  • 1.6.3 泵类安装 19
  • 1.7 电仪施工方案SCHEME OF ELECTRIC AND INSTRUMENTAL CONSTRUCATION 21
  • 1.7.1 变压器安装 Tranformer installation 21
  • 1.7.2 发电机电气设备安装 Installation of electric equipment of generator 26
  • 1.7.3 132KV高压配电装置 Installation of 132KV high-tension distribution equipment 27
  • 1.7.4 厂用配电装置施工方案 Auxiliary-powered distribution construction scheme 28
  • 1.7.5 其它电气设备施工方案 Scheme for additional electric equipment installation 32
  • 1.7.6 电缆桥架及电缆保护管安装 Cable bracket and protection tube setting 35
  • 1.7.7 电缆敷设 Cabling 36
  • 1.7.8 电缆做头、接线 Cable joints and connection wires 39
  • 1.7.9 132KV电缆敷设、做头施工方案 132KV cabling and fabrication 42
  • 1.7.10 控制盘(仪表及保护盘、台、柜)安装 47
  • Control plate installation ( for instrumentations, protection plate, platform and cabnets) 47
  • 1.7.11 DCS系统热控设备安装Installation of Hot control equipment in DCS system 49
  • 1.7.12 仪表管路敷设和严密性测试 Instrumentations piping and tightness test 50
  • 1.7.13 仪表取样及取源部件安装 Instrumentational sampling and element installation 53
  • 1.7.14 仪表及控制装置安装Installation of instrument and control devices 56

内容简介

本资料是海外工程重油发电机组安装施工组织设计(中英文版),总共61页。
    1机务部分施工方案
    ConstructionSchemefortheMachinerysection
    1.1主厂房行车吊装
    Mainbuildingbridgecraneinstallation
    1.1.1吊装步骤TheLiftingProcess
    1)将履带吊开至标识位置,松钩,挂钢丝绳。
    Risingthecrawlercraneuptothemarkposition,loosenthehookandsuspensionthesteelwireropes.
    2)将钢丝绳按照标识位置将固定端的行车大梁绑扎好,确保起吊时大梁平稳,必要时可利用链条葫芦调平。
   Makingthesteelwireropesinaccordancewiththemarkpositionandbiddingcranerunawaybuckstayofthefixedends.Thenkeepingthebuckstayrisesmoothlywhenhangingupthecrawlercrane.Itnecessarytousethechainblockwithsteelstructureadjustthebalance.
    3)利用吊车将该行车大梁吊至大跑车轨道上,并用钢丝绳、枕木和垫块将大梁固定平稳。
    Usingcranehangupthecranerunawaybuckstaytothetrackofbridgemotor,atthesametime,usingsteelwireropes,sleeperandcushionblockfixandkeepthecranerunawaybuckstaystably.
    4)用同样的方法吊装扩建端的大梁和两条大梁的连接件组合体,同样放置在大跑车轨道上。
    Usingthesamewayliftthebuckstayofextensionendsandtheconnectionpieceunitoftwobuckstaysthenputtheseontothetrackofbridgemotor
    5)将两片大梁连接组合。
    Conntectingandcomposingthetwobuckstays
    6)将小跑车吊到大梁轨道上就位。
    Lifting"thesmallracingbike"tothetrackofbuckstay,anditwillbepositionedonthistrack
    7)将驾驶室吊至行车下。
    Liftingthedrivingroomtoundersideofthebuckstay
    8)利用卷扬机将驾驶室吊至行车大梁端头下面,并与行车连接。
    Usingthewindingengineliftthedrivingroombelowthebuckstayends,andthenconnectswiththecranerunaway
    9)将行车向里拖运至合适的位置并锁定。
    Pullingthecranerunawayinnerofthestructure,thenfindthesuitableplaceandshockit.
    10)接电源,运入试吊重物,进行行车试吊。
    Connectingtheelectricalpower,andtrytolifttheheavy.
  

海外工程重油发电机组安装施工组织设计(中英文版)

海外工程重油发电机组安装施工组织设计(中英文版)-施工作业流程图

施工作业流程图

海外工程重油发电机组安装施工组织设计(中英文版)-作业流程图

作业流程图

下载文档

免责声明:BBS所有内容均为网友上传,仅供学习交流,如有侵权请通知我们删除。

  • 文件格式:doc
  • 文件大小:121.00KB
  • 等级:
扫码加入筑龙学社  ·  电气工程微信群 为您优选精品资料,扫码免费领取
分享至

分享到微信朋友圈 ×

打开微信"扫一扫",扫描上方二维码
请点击右上角按钮 ,选择 

 发表于2014-01-02   |  只看该作者      

2

    本资料是海外工程重油发电机组安装施工组织设计(中英文版),总共61页。项目非常具有参考价值,值得下载、收藏!

 发表于2016-11-03   |  只看该作者      

3

 这个是正是我需要的,但是这个币太高了。

percyzxp

湖北 平顶山 | 岩土工程

2 关注

3 粉丝

4 发帖

0 荣誉分

该博主未添加简介

猜你爱看

添加简介及二维码

简介

还可输入70字

二维码(建议尺寸80*80)

发站内信息

还可输入140字
恭喜您已成功认证筑龙E会员 点击“下载附件”即可
分享
入群
扫码入群
马上领取免费资料包
2/20